NEWS
NEWS
NTN news
Slider

NTN Extends Bearing Service Life on Thermal Rolls for Paper Manufacturer


9 September 2021 - Toronto - Success Report - Products

NTN Extends Bearing Service Life on Thermal Rolls for Paper Manufacturer

Rising competition can require today’s pulp and paper manufacturers to push their machines to new limits. Incremental increases in load, speed and operating temperatures will often reveal the “weakest” link in equipment that is operating above and beyond original design parameters. Sometimes that weakest link may prove to be a rolling element bearing.

At first glance, the easiest solution to mitigating bearing failures due to excessive and/or adverse operating conditions may be to install a larger, higher capacity bearing. Unfortunately, this will not always address the root cause. Furthermore, the required modifications to the machine can be complex and cost prohibitive. In these circumstances, NTN’s Engineering team will design and produce a custom bearing with advanced capabilities designed to perform effectively under specific operating conditions.

This was the case when a major Canadian paper manufacturer, Catalyst (a Paper Excellence Company), began to experience frequent, catastrophic bearing failures on the thermal rolls in the calendar section of two separate paper mills. NTN’s engineering team worked closely with Catalyst to review the application and operating conditions. Applied Industrial Technologies, LP (AIT) and NTN Bearing Corporation of Canada partnered to provide a solution that resulted in over 1.7 million dollars of savings in parts accrual, repair costs and downtime for this manufacturer.

NTN and AIT successfully implemented a solution to address the most plausible failure modes with case-hardened bearings. NTN’s commitment to delivering superior state-of-the-art solutions mirrors our own core values of innovation and adaptability, enabling our mills to operate profitably and sustainably.

Gerry Dube, Paper Machine Supervisor, Catalyst Powell River Division

Bearing Failure Investigation:


Catalyst began to experience frequent failures in the thermal roll at two separate mill locations. Both mills experienced unpredictable roller fractures in a competitor’s large spherical roller bearing. Within 18 months, the combined mills experienced 11 catastrophic failures resulting in a cost of over 1 million dollars in unexpected costs.

Failure analysis and application reviews at the mills were led by Drew Monk, AIT Manager TSR Services for Catalyst and Chris Rempel, NTN Engineering Manager. “Our customer’s success is intrinsically tied to our own. The magnitude of these failures made this issue a top priority for all three organizations,” says Chris Rempel.

Roller fractures are relatively uncommon and when it occurs, it is often secondary to another failure process (i.e., cage failure and subsequent loss of roller guidance). Roller fractures may be associated with excessive shock load as well as poor roller dynamics. Additional contributing factors may include tolerance issues in mating components, excessive temperature fluctuations and hydrogen embrittlement.

NTN, AIT and Catalyst collaborated to design and implement a custom bearing solution to mitigate roller fractures. As bearing failure costs were mounting quickly, a custom bearing was designed and produced in rapid fashion with an emphasis on reducing downtime.

Roller fractures were occurring with little to no additional failure symptoms and no warning, making the investigation difficult to diagnosis and predict. Although no definitive root cause could be assigned, several theories prevailed. A material enhancement was implemented that would mitigate the failure process. NTN, AIT and Catalyst worked to expedite bearing design, production, and implementation to stem the rapidly increasing cost of failures.

ntn extends bearing service life on thermal rolls for paper manufacturer

The Solution:


NTN’s portfolio includes a wide variety of material and heat treatment options for rolling element bearings. In particular, NTN’s capability to provide carburizing (case hardened) steel provided Catalyst with the opportunity to realize extended bearing service life. A custom case hardened, carburized bearing was designed and produced to mitigate roller fracture. Carburizing hardens the steel from the surface to the proper depth, leaving a relatively soft core. This provided hardness and toughness, making the material suitable for impact loads and resistance to fracture. Case carburized material offered significant advantages over standard bearing steel for this application. “We investigated many options and NTN was able to offer the most promising and robust solution” said Drew Monk, AIT Manager TSR Services, Catalyst.

A Successful Outcome:


To date, the NTN Spherical Roller Bearings have been in service for over 2 years and overall maintenance costs have been significantly reduced. The NTN solution has lasted over 6 times longer, without any failures to date. The two mills have been completely satisfied with the new case hardened, bearing solution.

An increase in bearing life was confirmed as the mills went from replacing 11 bearings in just over a year to the custom solution, still in operation, generating a total cost savings of $1,724,000 to date.

There were several theories as to the failure process. Unfortunately, as is sometimes the case with some extreme examples, no definitive root cause of failure could be determined. However, these high-performance bearings have extended maintenance intervals and maximized productivity.

Value added breakdown


INCREASED PRODUCTIVITY $324,000
INCREASED BEARING LIFE $1,400,000
DOCUMENTED COST SAVINGS $1,724,000

ANNUALIZED COST SAVINGS $944,000

construction new standard series of spherical roller bearing

Conclusion:


Rolling element bearings in complex operating conditions often require advanced features. In this scenario, NTN Bearings was able to optimize bearing design and provide a versatile drop-in solution to address adverse operating conditions, resolving uncertainty and boosting the customer’s operating profit.

When designing custom solutions, the importance of collaboration with our business partners cannot be overstated. Catalyst, NTN and Applied Industrial Technologies were able to work collaboratively, interact and share ideas to develop a bearing solution that delivered a cost savings of 1.7 million dollars. Active continuous improvement and optimized collaborative activity enhanced productivity for Catalyst, helping to minimize operating costs for each mill site where these bearings were installed. A well-balanced combination of expertise, experience and the rewarding dedication of each industry partner greatly contributed to the project’s success.

Case Carburization

  • The case carburization process creates bearings with a hard, wear resistant outer shell and a tough, ductile core.
  • The tough outer shell helps protect the rolling elements from debris, while the ductile core allows the bearing to both absorb increased shock loading and operate under misalignment without failing.
  • These traits are critical in heavy duty applications, in which bearings are forced to operate in heavily contaminated environments.
case carburization 1

Spherical Roller Bearings

  • Available in open and sealed varieties
  • Heavy duty cages available in either pressed steel or machined brass
  • Up to ±2° misalignment capability

Let us take the heat off you.
We’re here to help you achieve your productivity and performance goals. For more information, contact your NTN Sales Representative or call 1-888-412-4122. For technical questions, email techsupport@ntn.ca.

 

 


About NTN

Founded in 1918, NTN is one of the world's largest producers of premium quality ball and roller bearings, long recognized for the most stringent quality standards in the industry. With plants around the globe and a strong domestic manufacturing network, over 80% of the products sold by NTN in North America are made by one of the ten plants the company operates in Canada and the USA. NTN is also a leading provider of bearing services which include technical support, maintenance and reliability services, engineering consulting and training. NTN's company vision is "to transform into Canada’s leader of the Ultimate Bearing Experience."

NTN Contact

Rita Payne, NTN Marketing: rpayne@ntn.ca